WEIGHT

Tempered Glass Panels - Weight Per Surface Of Closure

2,40 lb/sqft = 11,7 kg/m2

Polycarbonate Panels - Weight Per Surface Of Closure

1,75 lb/sqft = 8,5 kg/m2

Load requirements are greater when the closure is in the stacked position.

The support structure must be able to carry the weight of a fully stacked closure.

Stacked Linear Weight = Weight per surface of clousure X Height of closure X 8

LISTINGS

Meets city visibility code requirement. Due to the perforated curtain this door not qualify for wind, fire, smoke and/or sound rating.

SIZE

30' wide, 30’ high standard construction. Large openings available of 60' wide or more, consult factory.

CURTAIN

The top and bottom of each section is fitted with an aluminum panel 4” (102mm) high. This panel consists of an aluminum extrusion 1/16” (1,6mm) thick and composed of modules with a 15° angle between them to facilitate the operation of the closure.

Tempered Glass Panels - The curtain is constructed of 6” (152mm) wide modules linked together by a continuous aluminum hinge. These hinges hold tempered glass panels 1/8” (3mm) thick and 4-3/4” (121mm) wide. Each glass panel is protected at its perimeter by a vinyl extrusion recessed within the full height of the hinges.

OPERATION

Manually operated - Easily slides into wall pocket.

TRACK

A. Curtain shall be hung from an overhead track 1-5/16” (33mm) wide by 1-9/16” (40mm) high. Track shall be tempered aluminum alloy 6351-T6.

B. Curves where required shall be 14” (356mm) radius standard.

STACKING

Stacking shall not exceed a depth of 1.15” per foot of closure width plus 3” for each post (lead, end or intermediate). (95mm/lin. m + 76mm per post). Full egress doors add 7” (178mm).

4" - 102mm min clearance both sides of track. If a pocket door is used, the door must not obstruct the entry dimension given.

WIND LOAD

Not Applicable.

MATERIALS & FINISHES

Curtains have typical exterior finish in Mill Finish, White, Black and Bronze.

Additional options include: Copper, Galvanized, Stainless Steel, Galvalume, Prime Painted Galvanized & Powder Coated.

Exterior skin is available in 1/16" thickness.

LOCKING

A. Lead post shall be equipped with a hook bolt lock with MobilFlex cylinders each side.

B. Lead post shall engage a full height wall jamb.

C. Trailing post shall be self-locking at the top and bottom inside the storage pocket.

D. Free floating intermediate posts shall be located at all curves and at recommended intervals of 10 feet (3m) or 5 feet (1,5m) for counter top units. Intermediate posts shall be equipped with self- adjusting spring loaded drop bolts activated from the inside only. Drop bolts shall engage dustproof stainless steel receptacles.

POCKET REQUIREMENTS

Interior pocket width, width 10" - 254mm is recommended with a standard 14" - 356mm radius and B at 12" - 305mm

WARRANTY

1-year warranty against defects in materials and workmanship.

LOCKING

Top and bottom locking posts with key cylinders one or both sides are available for either end of the curtain.

Large sections may be divided by incorporating bi-part units as intermediate posts.

Second hook bolts on lead, end or biparts (recommended for closures over 12’ (3,7m) high or for more security).

High security or master keyed lock cylinders - customer supplied and factory fitted.

Solid aluminum block covering cylinder lock for additional protection (specify cylinder protection).

Architect to decide side of lock cylinders.

Additional intermediate post with shoot bolt to floor or counter.

10” (254mm) radius curves (indicate location on plans).

Special radius curves (indicate location and radius on plans). Best Closures can bend an radius to match the design specified by client.

EGRESS COMPLIANCE

Bi-part egress door (bi-part post with interior thumb turn activation). Ideal choice.

Full egress door 36” x 80” (914mm x 2032mm) (where required by local building code). This egress door should be used only when the bi-part egress is refused (extra cost).