LISTINGS

Thermal Control with EPS-expanded polystyrene insulation, 8.0 R-Value

Sound Rated ASTM E90 / STC 26 – See Specifications Here

Air-leakage Rated ASTM E283 – See Specifications Here

Also avaible inFire and Smoke Rating upon request.

SIZE

30' wide, 30’ high standard construction. Large openings available of 60' wide or more, consult factory.

WEATHER STRIPPING

All Therma Guard doors are supplied with rubber weather stripping on guides, bottom bar and inside hood for preventing intrusion by water, dust or pests. Additionally this enhances the thermal qualities of the door by preventing air leakage.

SLATS

Manufactured from 2.5” wide metal slats roll formed to interlace together to create a continuous steel curtain. Also available in 1.5” wide for counter shutter applications or to meet astringently small headroom requirements.

Slats are composed of a front and back slat with EPS-expanded polystyrene insulation between providing for thermal and sound qualities.

OPERATION

Motor, Chain, Hand-Crank or Push-Up operation available based on size, weight or frequency of operation.

Battery backup available to ensure operation in the event of power failure or blackout.

USAGE

Standard construction is up to 15,000 cycles per year with High Cycle Construction available for doors expected to be operated more than 15,000 cycles per year, i.e. parking garages, sally ports.

FAST ACTING DOORS

For high traffic openings or where air flow or temperature control is critical, doors can be designed to operate at more than twice the speed of typical doors, or up to 2 ft./sec.

WIND LOAD

Wind-rated for pressures for the following available upon request:

+60/-65 Wind Pressures – See NOA Here

+65/-65 Wind Pressures – See NOA Here

+100/-100 Wind Pressures – See NOA Here

MATERIALS & FINISHES

Curtains have typical exterior finish in Mill Finish, White, Black and Bronze.

Additional options include: Copper, Galvanized, Stainless Steel, Galvalume, Prime Painted Galvanized & Powder Coated.

Exterior skin is available in 24, 22, 20, 18 and 16 gauge. Inside slat is tyical 24 gauge.

LOCKING

Chain Operation: Wall mounted chain keeper or zinc plated steel slide bolt with padlock provisions.

Push-Up or Hand-Crank Operation: Slidelocks, Round Locks or Cylinder Locks for locking at bottom bar (bottom bar design effects locking option available).

Motor Operator: No additional locking required as motor has automatic feature to prevent door from being lifted. Additional locking mechnisms include Slidelocks, Round Locks or Cylinder Locks for locking at bottom bar (bottom bar design effects locking option available).

WARRANTY

1-year warranty against defects in materials and workmanship.

BOTTOM BARS

Bottom Bar options include: Single Angle, Double Angle, Tubular (extruded alum.) or "T" bottom bar.

Bottom Bars have typical Mill Finish.

Additional options: Clear Anodized, Brass, Copper, Galvanized, Stainless Steel, Hot Rolled Steel, Powder Coated, Paint.

BRACKET PLATES

Bracket Plates can be Brass, Copper, Hot Rolled A36, Stainless Steel, Aluminum, Galvanized, Powder Coated, Stop Lock Bearing,Internal Charge, Chain Gearing, Round Bracket, Square Bracket, Single Gear Reducer.

COUNTERBALANCE ASSEMBLY

Counterbalance Assembly can be Hot Rolled A36, Galvanized, Stainless Steel, Aluminum, Torsion Spring, Cycle 17.5 to 400M, Welded Tabs, Taped Holes, Redi-Tube Motor, Thru-Shaft Push-up, Inside Charge, Lock Shaft Collar, Keyed, Bolted.

GUIDE MATERIAL

Guides are typical Mill finish.

Additional options: Clear Anodized, Brass, Copper, Galvanized, Stainless Steel, Hot Rolled Steel, Powder Coated, Paint, Strip Seal, Single Angle, Double Angle, Tubular, Slope Bar, Slide Locks.

Guides available in: Steel Angle, Roll Form, Aluminum Extruded.

Guides & Tracks configuartion available in: Z-Guide, E-Guide and F-Guide. For custom configuration requirements consult factory.

HOOD/COVER

Hoods are typically furnished if the coil is exposed. If provided, hoods are typical Steel Galvanized Finish.

Additional Finish Options: Brass, Copper, Stainless Steel, Galvalume, Prime Painted, Powder Coated

Standard shape is round cover. Options for squares or hexagonal upon request.

For aesthetic purposes if the coil is exposed there is a fascia option to hide door in up position. Motor cover available for preventing weather intrusions and security protection.

For hand operation different cover options are available for chain mechanism to accommodate weather intrusion, security protection and aesthetics.

Covers can be provided for all exposed mechanical parts, consult factory.